The electro-acoustic challenges of traditional stone Christian churches are many. Originally designed to disperse the sound of choirs and organs while filling their vaulted spaces with light, they rarely interact well with modern microphones and loudspeakers. In addition, their age and heritage status often makes incorporating wiring and any visibly modern technology physically and aesthetically difficult.
Intelligibility
Built between 1861 and 1865, St Jude’s in Sydney’s Randwick is a reproduction of its English architect’s own parish church, St. John’s at Randwick in Gloucestershire. Feeling it’s almost 150 years of continuous use, the parish recently embarked on a major project. “The whole church has been going through a restoration to take it back to its original condition and to hide anything modern” said Brett Steele, Manager – Installed Systems at The P.A. People. “The whole power system has been rewired, the lighting replaced and a lot of the stonework restored.”
The P.A. People were initially bought in to install a hearing induction loop – a major challenge in a heritage church. “St Jude’s is an old traditional sandstone church with a tiled floor” explained Brett. “Luckily, though, there is a raised timber floor under the pews, so we had somewhere to install the induction loop.” Brett and the team then set about pulling out the old sound system and its wiring, then completely replacing every component. Cabling had to be re-run in and around heritage timber and stone. Working with the church’s stonemason enabled The P.A. People to install the majority of the cabling out of sight. Six metres of custom brass ducting was installed under the marble stairs of the sanctuary in order to both hide cable runs and blend in with the church’s original brass ornamentation.
Sensitivity
The P.A. People chose to replace the loudspeaker system with a pair of JBL CBT 70J-1 column speakers with an added 70JE-1 extension, which increases pattern control down to 400Hz while increasing bass response down to 45Hz. The JBL CBT column speaker range has become a go-to in The P.A. People’s range of solutions, especially when dealing with challenging, reflective environments. “Having a vertically controlled loudspeaker helps a lot” Brett illustrated. “St Jude’s has lots of arches, very high ceilings and lots of exposed timber trusses; exactly what you’d expect from a mid-19th century church.”
Four Shure MX418 lectern microphones are used at the altar, lectern and prayer desks. A boundary microphone sits on the communion table. These are complemented by a Shure SLX radio microphone. All are processed through a Yamaha IMX644 rackmount mixer, which provides simple front panel volume control and saved scenes that can be recalled via dedicated buttons. A Crown XLS1500 power amplifier drives and protects the system. The result is a clear, coherent system that is easy to use for the congregation and clergy alike, unobtrusively incorporated into a church whose heritage is precious to its community.
Geoffrey Danks, Senior Architect for the St Jude’s restoration project, appreciated the sensitivity and care bought to the job. “The approach to the work undertaken by The P.A. People was exemplary” he said. “The location of cabling, speaker positioning and design were all undertaken to compliment the heritage of the building. The staff employed by The P.A. People extended themselves in cooperation and consideration to the fabric of the church and ensured that cabling was concealed within the stonework and that the speakers mounted in a sympathetic manner.”
